Query returned 11554 results.
An Integrated System for Improving Lighting Design Strategy
Chen, S. C.; Shih, S. C.; Chang, T. W. // 2002
Architectural illumination is typically designed at the end rather than the beginning, a design process. Designers use visualization to make relevant suggestions concerning lighting as illumination ...
An Interface Specification for Principle Solutions Supporting the Cross-Domain Design of Mechatronic Systems
Möhringer, S.; Gausemeier, J. // 2002
Starting from the principle solution of a mechatronic system its components are usually worked out in detail decentralised within the envolved engineering domains. With the increasing design progress ...
Analysis of Consistency between Production Order Requirements and Resouces Availablity in a Virtual Enterprise
Banaszak, Z. A. // 2002
Analysis of the Tooth Root Stress in High Transverse Contact Ratio Involute Gearing
Lovrin, N.; Križan, B. // 2002
This paper deals with the analysis of the tooth root stress in high transverse contact ratio (HCR) gearing. Based on the realistic load distribution on tooth pairs in mesh, which has been determined ...
Analytical and Numerical Analysis of Non-Symmetrical All Steel Sandwich Panels Under Uniform Pressure Load
Kujala, P.; Klanac, A. // 2002
Steel sandwich panels welded by laser can offer 30-50 % weight savings compared to the conventional steel structures. In the paper, the behaviour of the non – symmetrical all steel sandwich panels ...
Annotation and Knowledge Creation
Boujut, J.-F. // 2002
Annotation is a natural way for adding information to a specific representation. Every designer knows that, and it is the first thing a designer do when he wants to express a point of view or ...
Anwendung des AEM-Verfahrens in der Produktentwicklung
Fejes, E.; Günter, H.; Bercsey, T. // 2002
Application of Damage Model for Numerical Determination of Carrying Capacity of Large Rolling Bearings
Kunc, R.; Prebil, I.; Rodic, T.; Korelc, J. // 2002
An exploitation of large axial bearings includes some load peaks, which cause permanent deformation of rolling contact. The plastic strain of base material under the hardened rolling layer starts to ...
Application of ICDM for the Conceptual Design of a New Product
Hari, A.; Herscovitz, J.; Zonnenshain, A.; Weiss, M. P. // 2002
ICDM is an Integrated, Customer Driven, Conceptual Design Method for the entire conceptual design process. ICDM is briefly presented in this paper and demonstrated with a detailed case study.
The ...
Application of Methods from Social Sciences in Design Research
Bender, B.; Reinicke, T.; Wünsche, T.; Blessing, L. T. M. // 2002
In many engineering publications on approaches to support design activity, there is little evidence of use of valid empirical data. Proposals often rely on single findings, on assumptions or on ...
Application of the Agent System Method in Managing Design Process Tasks
Weiss, Z.; Dostatni, E. // 2002
Approaches of Knowledge-Based Design
Vajna, S. // 2002
Knowledge-based design is a concept for the computer-aided provision and application of different representations of knowledge along the product development process. In this paper, after proposing a ...
Aspects to the Coordination of Collaborative Design
Cumming, M. // 2002
This research studies methods for providing design process support for distributed groups of designers, to allow them to collaborate and co-ordinate their actions, within the context of collaborative ...
Assembly Configuration and Appearance Changes in VRML Environment
Jezernik, A.; Hren, G.; Golob, B. // 2002
3D CAD models provide a natural way of sharing design information among designers. VR emerged to be a popular technology for human-computer interface in product design fields. VRML is a tool ...
Assessing Design Activity: Issues and Actions
Cowdroy, R.; Williams, A. // 2002
An international collaborative research and development program documents a single framework to resolve inconsistencies between good teaching principles, accreditation requirements and the various ...
Bottom Structure For DutchEVO Car: Formulation Of The Problem And The Adjustment Of The Optimization System
Ermolaeva, N. S.; Kaveline, K. G.; Spoormaker, J. L. // 2002
The optimization problem of the DutchEVO car bottom structure was formulated with respect to the minimum mass under the constraints revealed from bending load case. The Multipoint Approximation ...
Building the Design Observatory: a Core Instrument for Design Research
Carrizosa, K.; Eris, Ö.; Milne, A.; Mabogunje, A. // 2002
The "observe-analyse-intervene" method allows a complex system to be perturbed to deepen understanding and reveal hidden assumptions. Historically we have collected analogue audio and video ...
CAD 3D Systems in Modeling of Hydraulic Components on Example of Gear Pump
Lisowski, E.; Domagala, M. // 2002
Classification of Design Research Documents
McMahon, C.; Culley, S.; Lowe, A. // 2002
Classification involves the development and use of schemes for the systematic organisation of knowledge (represented as information) (Langridge, 1992). The origins of modern approaches towards ...
Cleaning up Design Methods - Describing Methods Completely and Standardised
Birkhofer, H.; Kloberdanz, H.; Berger, B.; Sauer, T. // 2002
To improve the design process, it is aimed to optimise the description of design methods and the access to them for effective use in design projects and for better support of learning and teaching. ...
Colibri - A Collaborative Design System for Product Data Integration
Kleiner, S.; Anderl, R.; Gräb, R. // 2002
An extended parametric information model is presented in order to integrate product data based on parameters and constraints for design process reasons. Constraints represent parametric relations ...
Collaborative Engineering: 'Towards Design Guidelines for Risk Management in Distributed Software Development'
van Grinsven, J.; de Vreede, G.-J. // 2002
Distributed software development activities require intense collaboration between groups who are scattered over geographically separated locations. While group-oriented software development has ...
Colour in Technical Presentation
Salamon, V.; Žiha, K. // 2002
This paper considers the gap between the standardized single coloured, mainly two-dimensional representations in engineering design based on rules of technical drawing and new, mostly optional ...
Communicating Engineering Design - A Critical Success Factor in Projects
Baumgärtner, C. E. // 2002
Engineering projects or designs fail frequently because they are not communicated well to the management of the company in which they are carried out. Communication of project proposals, project ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.